Hawke Precision Steel 1" 2 Piece Weaver QR Steel Scope Rings - Medium
Solid steel quick-release scope mounts for 1" tubes. Fits Weaver and Picatinny rails
- Quick Release Lever
- Double Torx Screws To Hold Your Scope Firmly In Place
- Designed For Weaver/Picatinny Rail Fitting
- Solid Steel Construction For Superior Strength
#1451
#1450
#1444
#1447
#1445
The Hawke Precision Steel Quick Release Scope Rings are a strong, reliable mounting solution for shooters using 1" (25.4mm) scope tubes on Weaver or Picatinny rails.
Built from solid steel for maximum durability, these medium-height two-piece mounts feature quick-release levers for fast removal and refitting without tools, making them ideal for rifles that regularly switch optics or require easy transport and maintenance
Ring Height 22mm base to ring center
Scope compatibility guidance based on 22mm base to center - please note this is approximate
As a theoretical maximum, a 22mm centre height allows for approximately 44mm objective housing diameter clearance (22mm × 2 = 44mm). In reality, a scope with a 44mm outer diameter would sit directly against the rifle or rail, so a practical absolute maximum would be closer to 43mm.
However, this calculation assumes the objective bell is positioned directly over a flat receiver or rail. On many rifles, the objective extends forward beyond the receiver and sits above the barrel, where additional clearance is often available.
For rifles with a flat receiver and where the objective sits directly above the rail, we would recommend an objective housing diameter of around 32mm maximum for comfortable clearance.
If the objective bell extends beyond the receiver and overhangs the barrel, significantly larger objective housings may be accommodated depending on the rifle and scope combination.
Important:
Always measure the OUTSIDE diameter of the objective housing (objective bell), not the advertised lens size. Two scopes with the same lens size can have very different outer diameters due to wall thickness, adjustable objective mechanisms, illumination systems and overall scope design.
If in doubt, measure your scope's objective housing and compare it with your rifle's available clearance before ordering.
- Configuration: 2 Piece
- Ring Size (Diameter): 25.4mm 1"
- Height: Medium
- Rail: Weaver / Picatinny
- Fixings (Top Cap): Double Torx Screw
- Fixings (Rail): Lever
- Internal Cushion: No
- Retractable 'Recoil Stop' Pin: No
- Height: 41mm 1.7" (total)
- Weight: 138g 4.9oz
- Hawke Worldwide Warranty
- Made in China
- Quick Release Lever
- Double Torx Screws To Hold Your Scope Firmly In Place
- Designed For Weaver/Picatinny Rail Fitting
- Solid Steel Construction For Superior Strength
Q: Will these fit my scope?
A: They fit scopes with a 1" (25.4mm) main tube diameter only.
Q: Will these fit a Picatinny rail?
A: Yes, they are designed for both Picatinny and Weaver rails.
Q: Will these fit a standard 9-11mm airgun dovetail rail?
A: No. These mounts are for Weaver/Picatinny rails. A suitable rail adapter would be required.
Q: Are these quick-release mounts?
A: Yes. They feature lever-operated quick-release clamps for tool-free removal and refitting.
Q: Are they steel or aluminium?
A: These mounts are manufactured from solid steel for increased strength and durability.
Q: What height are they?
A: This is the Medium version, offering more objective bell clearance than low mounts while maintaining a practical sight height.
Q: How many rings are included?
A: One complete pair (2-piece mount set) is included.
Q: Will removing and refitting affect zero?
A: Quick-release mounts are designed to return close to zero when refitted correctly, although checking zero after removal is always recommended.
Q: What size scope objective will these mounts fit?
A: There is no single objective lens size that these mounts are guaranteed to fit. Compatibility depends on the OUTSIDE diameter of the objective housing (bell), not the advertised lens size. With a 22mm base-to-ring centre height, the theoretical maximum objective housing diameter is approximately 44mm, although this would leave little to no clearance. For scopes positioned directly over a flat receiver or rail, we would recommend around maxiumum 43mm outer objective diameter for comfortable clearance. Larger objective housings may fit where the scope extends forward and overhangs the barrel. We recommend measuring your scope's outer objective housing diameter and comparing it to your rifle's available clearance before ordering.
- Hawke Worldwide Warranty
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
COURIERS
 |
 |
 |
 |
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number. We are unable to add delivery notes to your order regarding safe spaces or neighbour deliveries. If you require this service it can be arranged directly with the courier once the parcel is in their network.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. We aim to dispatch all orders within 1-2 working days, but during busy periods dispatch may be delayed by a day or so. If you would like to purchase the item in person then please call ahead to arrange an appointment: 01803 611 895.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. Optics Warehouse advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01803 611 895 or email sales@opticswarehouse.co.uk
-
A NOTE ABOUT DPD SHIPMENTS:
- Please be advised that we have now introduced DPD Pins to all DPD orders from Optics Warehouse.
- If your shipment is being sent from Optics Warehouse via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
- The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
- Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
- Please view the attached slides HERE for further information!
Please note: All clearance calculations are based on mounts with 0 MOA. While MOA can be factored in, actual clearance may vary due to variables that can't always be accurately calculated. If you're considering an MOA mount and are unsure about the required height, we recommend contacting our sales team directly.
Measure the outermost diameter of your scope’s objective bell (including any flare).
Measure the thickness of any scope cover if used. If none, leave as 0.
Measure from the top of the rail to the highest point of the barrel.
We add a little extra clearance to account for real-world variation. Default is +1 mm.
Enter your measurements above to calculate the lowest ring height (base-to-centre) you can realistically use.
(A + 2×B) / 2 − C + TWhere A = objective outer diameter, B = cover thickness, C = rail-to-barrel clearance, T = tolerance.