Vector Optics 30mm Steel Flip to Side Picatinny Ring
The Vector Optics 30mm Steel Flip-to-Side Picatinny Ring is basically a heavy-duty magnifier mount that lets you swing your optic out of the way instantly when you don’t need it. It’s built from full steel with a rock-solid clamp system, so it’s more about durability and repeatability than lightweight finesse. Simple idea, tough execution—flip it in when you need magnification, flip it out when you don’t, no re-zero drama.
-Nathan (Technical Advisor)
#1367
#1332
#1370
#1368
#1371
- Diameter: 30mm
- Overall Length: 40mm / 1.6in
- Overall Height: 61mm / 2.4in
- Mount Length: 32mm / 1.2in
- Ring Width: 40mm / 1.6in
- Central Height: 38mm, 1.5in bottom to center
- Ring Length: 25.4mm / 1.0in
- Material: Steel
- Weight: 210g / 7.4oz
- Mount: 1913 Picatinny
- Flip-to-Side Degree: 90°
- Finish: Black matte
- Screws per ring: 6
- 30mm Diameter
- Full Steel
- 38mm 1.5" from Bottom to Ring Centre
- Six Screws per Ring
- Flip-to-Side 90° Degree
- Vector Optics 30mm Steel Flip to Side Picatinny Ring
1. What is this mount used for?
It’s mainly used for magnifiers or secondary optics that need to flip to the side when not in use.
2. What tube size does it fit?
It fits 30mm diameter optics.
3. Is it compatible with Picatinny rails?
Yes, it mounts directly to standard Picatinny rails.
4. What is it made of?
It’s made from full steel construction for maximum strength and recoil resistance.
5. How does the flip-to-side mechanism work?
It rotates the optic 90° to the side so your primary sight line is clear, then locks back into place when needed.
6. Does it hold zero when flipped back?
Yes, it’s designed for repeatable positioning so your optic returns to the same alignment.
7. Is it heavy compared to aluminum mounts?
Yes, steel makes it noticeably heavier, but also much more robust.
8. Is it quick-detach?
No, this version is flip-to-side, not quick-detach.
9. What is it best paired with?
Usually magnifiers behind red dots or compact secondary optics setups.
10. Why choose steel instead of aluminum?
Steel is chosen for maximum durability and rigidity, especially for recoil-heavy or hard-use setups.
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
COURIERS
 |
 |
 |
 |
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number. We are unable to add delivery notes to your order regarding safe spaces or neighbour deliveries. If you require this service it can be arranged directly with the courier once the parcel is in their network.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. We aim to dispatch all orders within 1-2 working days, but during busy periods dispatch may be delayed by a day or so. If you would like to purchase the item in person then please call ahead to arrange an appointment: 01803 611 895.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. Optics Warehouse advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01803 611 895 or email sales@opticswarehouse.co.uk
-
A NOTE ABOUT DPD SHIPMENTS:
- Please be advised that we have now introduced DPD Pins to all DPD orders from Optics Warehouse.
- If your shipment is being sent from Optics Warehouse via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
- The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
- Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
- Please view the attached slides HERE for further information!
Please note: All clearance calculations are based on mounts with 0 MOA. While MOA can be factored in, actual clearance may vary due to variables that can't always be accurately calculated. If you're considering an MOA mount and are unsure about the required height, we recommend contacting our sales team directly.
Measure the outermost diameter of your scope’s objective bell (including any flare).
Measure the thickness of any scope cover if used. If none, leave as 0.
Measure from the top of the rail to the highest point of the barrel.
We add a little extra clearance to account for real-world variation. Default is +1 mm.
Enter your measurements above to calculate the lowest ring height (base-to-centre) you can realistically use.
(A + 2×B) / 2 − C + TWhere A = objective outer diameter, B = cover thickness, C = rail-to-barrel clearance, T = tolerance.