WULF by Sportsmatch OP44C 30mm 1 Piece Medium Extended 9mm-11mm Scope Mount
Get the perfect balance of strength, alignment, and flexibility with the WULF by Sportsmatch OP44C 30mm 1 Piece Medium Extended 9mm–11mm Scope Mount. Designed for shooters who demand reliability, this one-piece mount delivers exceptional stability and consistent zero retention thanks to its solid construction and precision engineering. The extended cantilever design provides improved eye relief positioning, making it ideal for rifles where scope placement can be challenging. Built to fit standard 9–11mm dovetail rails, it offers a secure fit for air rifles and rimfire setups, while the medium height profile comfortably accommodates most scopes up to 44mm objective size. Durable, dependable, and purpose-built, the OP44C is a smart upgrade for any serious shooting setup.
-Nathan (Technical Advisor)
#1266
#1312
#1315
#1318
#1313
- 30mm Diameter Body Tube Medium Range For 9mm-11mm dovetails up to 44mm lens diameter.
- Ideal for certain combination guns and Falcon / Titan air rifles.
- Does not include arrestor pin.
Please Note- these Sportsmatch mounts are produced in Collaboration with WULF Optics and come in WULF Grey packaging.
Height = 30mm
- A: 15mm
- B: 100mm
- C: 57mm
- Weight: 110g
Please Note- For measurement purposes only. The mount in the diagram is not the mount you are purchasing. Please see the top of the listing for images.
- Sportsmatch OP44C 30mm 1 Piece Medium Extended 9mm-11mm Scope Mount.
1. What scope size does this mount fit?
It is designed for scopes with a 30mm tube diameter.
2. What rail type is it compatible with?
It fits 9–11mm dovetail rails, commonly found on air rifles and rimfire rifles.
3. What is the benefit of the extended design?
The cantilever (extended) design helps improve eye relief positioning, especially on rifles with limited mounting space.
4. Is this a one-piece or two-piece mount?
It is a one-piece mount, offering improved strength and alignment.
5. What height is this mount?
It is a medium-height mount, with approximately 15mm from the base to the bottom of the scope ring.
6. What objective lens size can it accommodate?
It is suitable for scopes up to around 40mm AO or 44mm non-AO lenses.
7. Does it include an arrestor pin?
No, this model does not include an arrestor pin.
8. What is it made from?
It is constructed from high-quality, precision-machined materials for durability and long-term use.
9. How much does it weigh?
It weighs approximately 110g, providing a solid yet lightweight mounting solution.
10. What type of rifles is it best suited for?
It is ideal for air rifles, rimfire rifles, and certain combination guns where eye relief adjustment is needed.
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
COURIERS
 |
 |
 |
 |
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number. We are unable to add delivery notes to your order regarding safe spaces or neighbour deliveries. If you require this service it can be arranged directly with the courier once the parcel is in their network.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. We aim to dispatch all orders within 1-2 working days, but during busy periods dispatch may be delayed by a day or so. If you would like to purchase the item in person then please call ahead to arrange an appointment: 01803 611 895.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. Optics Warehouse advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01803 611 895 or email sales@opticswarehouse.co.uk
-
A NOTE ABOUT DPD SHIPMENTS:
- Please be advised that we have now introduced DPD Pins to all DPD orders from Optics Warehouse.
- If your shipment is being sent from Optics Warehouse via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
- The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
- Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
- Please view the attached slides HERE for further information!
Please note: All clearance calculations are based on mounts with 0 MOA. While MOA can be factored in, actual clearance may vary due to variables that can't always be accurately calculated. If you're considering an MOA mount and are unsure about the required height, we recommend contacting our sales team directly.
Measure the outermost diameter of your scope’s objective bell (including any flare).
Measure the thickness of any scope cover if used. If none, leave as 0.
Measure from the top of the rail to the highest point of the barrel.
We add a little extra clearance to account for real-world variation. Default is +1 mm.
Enter your measurements above to calculate the lowest ring height (base-to-centre) you can realistically use.
(A + 2×B) / 2 − C + TWhere A = objective outer diameter, B = cover thickness, C = rail-to-barrel clearance, T = tolerance.