RCBS Full Length Die Set .243 Winchester
The RCBS Full Length Die Set .243 Winchester is one of those no-nonsense tools that just gets your brass back into perfect working order every time. It resizes the whole case back to spec, knocks out the spent primer, and then seats your bullet cleanly with a solid crimp if you need it. Simple two-die setup, but it’s built for consistency, smooth chambering, and reloads that just cycle properly without drama.
-Nathan (Technical Advisor)
#1402
#1403
#1406
#1409
#1404
The RCBS Full Length Die Set for .243 Winchester is designed to deliver reliable and consistent results for precision handloading. This 2‑die set provides the essential tools needed to resize cases and seat bullets with accuracy, helping reloaders produce dependable ammunition for both target shooting and hunting.
The full length sizing die features an integrated expander‑decapping unit, which removes the spent primer while expanding the case mouth in a single operation. Vent holes in the die body help prevent case damage by allowing trapped air and excess lubricant to escape during resizing, ensuring smoother and safer case preparation.
The set also includes a bullet seating die with a dedicated seater plug, allowing precise bullet placement and consistent cartridge assembly. Depending on the cartridge requirements, the die provides a built‑in roll or taper crimp, helping secure the bullet firmly in place. Designed for durability and precision, the RCBS Full Length Die Set is a dependable addition to any .243 Winchester reloading setup. Shellholders are sold separately.
- Product Type Full Length Die Set
- Calibre .243 Winchester
- Die Set Configuration 2‑Die Set
- Sizing Die Type Full Length Sizer Die with Expander‑Decapping Unit
- Seating Die Type Bullet Seating Die with Seater Plug
- Crimp Type Built‑In Roll or Taper Crimp (cartridge dependent)
- Vent Holes Yes
- Shellholder Included No (Sold Separately)
- Two-die reloading set designed for efficient case resizing and bullet seating.
- Full length sizing die resizes the entire cartridge case to ensure reliable chambering.
- Integrated expander‑decapping unit removes the spent primer while expanding the case mouth in a single operation.
- Vent holes in the die body release trapped air and excess lubricant to help prevent case damage during resizing.
- Bullet seating die with dedicated seater plug allows for precise and consistent bullet seating.
- Built-in crimping capability provides either a roll or taper crimp depending on cartridge requirements.
- Supports consistent cartridge assembly, helping reloaders produce reliable and accurate ammunition.
- Durable die construction designed to withstand repeated use in reloading environments.
- Optimised for smooth case preparation and bullet seating, improving efficiency during the reloading process.
- Compatible with standard reloading presses, making it suitable for most reloading setups.
- Part of the trusted RCBS reloading equipment range, known for reliability and precision.
- RCBS Full Length Die Set .243 Winchester
1. What is the RCBS Full Length Die Set .243 Winchester used for?
It’s used to resize fired .243 Winchester brass back to SAAMI-spec dimensions so it will chamber reliably, while also allowing bullet seating and priming removal.
2. What comes in the set?
It includes a full-length sizing die with decapping/expander unit and a seating die with a bullet seating plug (often with built-in crimp capability).
3. Does it resize the whole case or just the neck?
It’s a full-length die set, so it resizes the entire case body and neck—not just the neck area.
4. Is it suitable for bolt-action rifles?
Yes, full-length sizing is commonly used for bolt-action rifles to ensure reliable chambering, especially with mixed or once-fired brass.
5. Does it remove spent primers?
Yes, the sizing die includes a decapping pin that removes the spent primer during the resizing process.
6. Do I need a shellholder for this die set?
Yes, shellholders are not included and must be purchased separately.
7. What press does it fit?
It uses the standard 7/8"-14 thread, so it fits most common single-stage and turret presses.
8. Does it improve accuracy?
Indirectly—its main job is consistency. Proper sizing and seating help improve uniform chambering and shot-to-shot reliability.
9. Is it beginner-friendly?
Yes, it’s a straightforward two-die system and is often one of the first die sets new rifle reloaders use.
10. Why choose full-length dies over neck sizing only?
Because full-length sizing gives more reliable chambering across different rifles and extends compatibility, especially when brass has been fired multiple times or used in different chambers.
- RCBS Limited Lifetime Warranty
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
COURIERS
 |
 |
 |
 |
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number. We are unable to add delivery notes to your order regarding safe spaces or neighbour deliveries. If you require this service it can be arranged directly with the courier once the parcel is in their network.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. We aim to dispatch all orders within 1-2 working days, but during busy periods dispatch may be delayed by a day or so. If you would like to purchase the item in person then please call ahead to arrange an appointment: 01803 611 895.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. Optics Warehouse advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01803 611 895 or email sales@opticswarehouse.co.uk
-
A NOTE ABOUT DPD SHIPMENTS:
- Please be advised that we have now introduced DPD Pins to all DPD orders from Optics Warehouse.
- If your shipment is being sent from Optics Warehouse via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
- The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
- Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
- Please view the attached slides HERE for further information!