American Defence Vertical Ring Set for ADM Recon or Scout Style Mounts - 40mm Black
#1451
#1450
#1440
#1443
#1433
- Precision machined from 6061 T6 aluminum for strength and lightness
- Hard coat T3 Mil-Spec anodized finish for superior durability and resistance to wear
- Compatible with both the ADM Recon and Scout series mounts
- Sold in pairs for a complete mounting solution
- Lifetime warranty from American Defense MFG, LLC.
- Made in the U.S.A. with pride
- American Defence Vertical Ring Set for ADM Recon or Scout Style Mounts - 40mm Black
1. What is the ADM 40mm Vertical Ring Set?
The American Defense 40mm Vertical Ring Set is a replacement ring kit designed for ADM Recon and Scout-style scope mounts. It lets you mount 40mm tube optics or swap your existing ring size without replacing the whole mount.
2. What is it used for?
It’s used to adapt or replace the scope rings on an ADM Recon or Scout QD base. This is especially useful if you’re changing optics but want to keep your existing ADM mount system.
3. Which ADM mounts is it compatible with?
It is compatible with ADM Recon and ADM Scout series mounts, making it a direct fit for those modular mounting systems.
4. What tube size does this version fit?
This version is designed for 40mm scope tubes, which are common in high-end precision and long-range rifle optics.
5. What is it made from?
The rings are precision-machined from 6061-T6 aluminium, offering a strong but lightweight construction suitable for repeated recoil use.
6. What finish does it have?
It uses a Type III hardcoat anodized finish in black, which helps protect against corrosion, scratches, and general field wear.
7. Does it include the full mount?
No. This is only the vertical ring set. You still need a compatible ADM Recon or Scout base to complete the mounting system.
8. Is it strong enough for heavy recoil rifles?
Yes. ADM rings are designed for magnum and precision rifle use, with a rigid design intended to maintain zero under recoil.
9. Can I swap between different ring sizes?
Yes. One of the main advantages of the ADM system is that you can swap ring sizes (e.g. 30mm, 34mm, 35mm, 40mm) without replacing the entire mount.
10. Why would someone choose this over a full new mount?
Most people buy this when they change optics but want to keep their existing ADM base. It’s a cost-effective way to reconfigure your setup without starting from scratch.
Our aim is to ensure that your order arrives with you as soon as possible and in the safest, most cost-effective means.
Please Note: Shipping charges may be subject to additional surcharges if out of area or over weight restrictions.
Please Note: DPD SHIPMENTS REQUIRE THE CUSTOMER TO SHOW A PIN CODE ON DELIVERY - READ MORE: HERE
COURIERS
 |
 |
 |
 |
We use DPD , RoyalMail, TNT and UPS courier services for all our orders whether dispatching to the UK or International. As soon as your order has been dispatched you will receive an email with your unique tracking number. We are unable to add delivery notes to your order regarding safe spaces or neighbour deliveries. If you require this service it can be arranged directly with the courier once the parcel is in their network.
IN-STORE ITEMS
These are items that we have in-stock and will be sent out for delivery as soon as possible. We aim to dispatch all orders within 1-2 working days, but during busy periods dispatch may be delayed by a day or so. If you would like to purchase the item in person then please call ahead to arrange an appointment: 01803 611 895.
PRE-ORDER ITEMS
These are usually items that are going to be out-of-stock for a number of weeks or are in short supply. By purchasing a Pre-Order Item you are in effect paying a deposit for your goods. As soon as the item is back in stock yours will be dispatched within 24 hours where possible. Please see individual product pages for current back-in-stock dates. In rare occasions, these dates can be changed by the manufacturers so we recommend staying in contact with Optics Warehouse depending on the product lead time.
INTERNATIONAL DELIVERY & TAXES
In addition to the above information If your delivery address is outside of the UK you may be subject to import duties and taxes, which are levied once a shipment reaches your country. Any such additional charges for customs clearance must be borne by you. You should note that customs policies vary widely from country to country. Optics Warehouse advises each customer to contact their local customs office for further information if they are in any way unsure of local duties or liabilities. Cross border shipments are subject to opening and inspection by customs authorities which means some packages may be opened and re-sealed.
NEED HELP?
If you require any further assistance, please call us on 01803 611 895 or email sales@opticswarehouse.co.uk
-
A NOTE ABOUT DPD SHIPMENTS:
- Please be advised that we have now introduced DPD Pins to all DPD orders from Optics Warehouse.
- If your shipment is being sent from Optics Warehouse via DPD you will be sent a Pin Code that must be shown to the courier upon delivery.
- The pincode is sent VIA email & TEXT message. A valid email address and mobile number must be provided at checkout. Emails will be sent from "Riviera House 3PL" - if you do not receive this email please check your junk or spam folders.
- Please note that if you do not display your pin code to the courier driver upon delivery, you will not be able to have your item and you may need to schedule another delivery date to show a valid pin.
- Please view the attached slides HERE for further information!
Please note: All clearance calculations are based on mounts with 0 MOA. While MOA can be factored in, actual clearance may vary due to variables that can't always be accurately calculated. If you're considering an MOA mount and are unsure about the required height, we recommend contacting our sales team directly.
Measure the outermost diameter of your scope’s objective bell (including any flare).
Measure the thickness of any scope cover if used. If none, leave as 0.
Measure from the top of the rail to the highest point of the barrel.
We add a little extra clearance to account for real-world variation. Default is +1 mm.
Enter your measurements above to calculate the lowest ring height (base-to-centre) you can realistically use.
(A + 2×B) / 2 − C + TWhere A = objective outer diameter, B = cover thickness, C = rail-to-barrel clearance, T = tolerance.